We are deploying Office 2013 to many PC's in our environment. Soon we will be deploying this to remote sites that have 50 - 75 PC's. We have one SCCM site server at Site A. Our remote sites are setup as distrubution points with AD boundaries. The remote sites have a site to site VPN connection that is fairly slow (10-20 mb). I am trying to figure out the best way to deploy this Office 2013 application to these remote sites without making any SCCM site configuration changes (basically using my site setup the way it is with our site server at Site A and then the remote sites being setup as distrubtition points). I currently have an application created for these remote sites but the content is pointing to a server on Site A. My question is then:

1. Would it be best to copy the Office 2013 install content to each remote site server to a file share, and then on our main sccm site, create an application and point to the content on these remote site servers for the installation files? And then of course chose the remote server as the only distribution point? My thought is by doing it this way, nothing gets copied over the site to site pipe between the main site and the remote site. Or does sccm still copy files back onto itself?

2. Or is better to keep the content on the sccm server file share, but distribute it to the remote sites distribution points? My only fear with doing it this way is it will take the connection down due to having to copy 700 mb over a 10-20 mb pipe that gets used for everything.

Hopefully my explanation makes sense...

Been asking this for a while now everywhere... Can't find the answer. So the problem is, how can I make a SCCM 2012 Global Condition which can be used to determine Active Directory group the User/Computer belongs to?

I was planning to use this kind of Requirement as Application deployment base, so that certain software would only be deployed to the computers which are in the software group (in the Active Directory)...

Anyone?

Hi

I have a load of applications within SCCM, and they are working fine.  What i want todo is run a quick command after each one has been installed.  My plan is to add another deployment type to the application todo this.  But whenever i add another deployment type to an existing application, and i update it's content.  The changes aren't reflected.

If i view the application within the Software Center of a workstation.  It still only shows "1 component" which as far as i'm aware is the same number of deployment types for each application.

So how can i force this application to be updated?  Again, this isn't content...but adding another..."action" if you will to the application by adding another deployment type.

Hope that makes sense.

Hi,

We are using App-V 5.0 SP3 for computers (in test phase) as well as Terminal Servers (in production, App-V 4.6 and 5.0 on the same W2K8R2 servers). We were thinking about using a App-V management server since SCCM integrated App-V has downsides, most important one is no automatic uninstall. Then there is this comparison which shows that integrating in SCCM has much more options: http://virtualvibes.co.uk/app-v-management-server-or-configuration-manager-2012-a-feature-comparison

So we're back at going for "SCCM App-V integrated" and the issue that uninstall doesn't happen automatically. Also there is this post which tells us "With App-V 5.0 SP2, App-V packages that are being used cannot be uninstalled." http://henkhoogendoorn.blogspot.be/2013/07/configmgr-2012-sp1-with-app-v-50.html

So I'm still looking for the best approach to:

*deploy App-V 5.0 packages to terminal servers via SCCM 2012 (user targetted): an uninstall won't happen for one user if another user has it in use? Then how can we enforce an uninstall/remove an application nicely?
*deploy App-V 5.0 packages to W7 computers via SCCM 2012 (first phase, later we will deploy to users on the computers): deploy an App-V package to  certain collection with computers, deploy an uninstall to "all computers" so that if computerobject isn't member of the collection, it will uninstall? Won't every user then receive loads of uninstalls triggered (even not visible in the console)?

Sound all quite messy for me.
Please advise.
J.

Jan Hoedt

Hi guys,

Recently I've tried to install Kaspersky security endpoint protection (KES) 8.1.0.1042 latest from 8 version and its failed. The KES its built also with network agent. In some point the sccm agent receive a -1 exit code, I don't understand what mines and I search  a lot. On win 7 SCCM report that installation it's failed but Kaspersky runs difrent msi and AV it's installed. I setup SCCM to for -1 code for a soft restart. After re-evaluation SCCM find Kaspersky installed and everything its fine.

On XP 32/64 the process its same just after -1 exit code also Kaspersky its  stopped and nothing happens any more. The bad point it's if I run setup.exe /s from sccmcache its fine for all OS's. So I guess that the problem its how sccm agent handle the setup process.

The exe file its generate by KSC (kaspersky security center console) for a standalone installation.      Logs:

$klnagent.log

=== Verbose logging started: 08/04/2015  11:16:11  Build type: SHIP UNICODE 3.01.4000.3959  Calling process: C:\WINDOWS\system32\msiexec.exe ===
MSI (c) (FC:A8) [11:16:12:315]: Resetting cached policy values
MSI (c) (FC:A8) [11:16:12:315]: Machine policy value 'Debug' is 0
MSI (c) (FC:A8) [11:16:12:315]: ******* RunEngine:
           ******* Product: C:\WINDOWS\system32\config\SYSTEM~1\LOCALS~1\Temp\{0873C~1\pkg_1\exec\Kaspersky Network Agent.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (FC:A8) [11:16:12:315]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (FC:A8) [11:16:12:593]: Grabbed execution mutex.
MSI (c) (FC:A8) [11:16:13:472]: Cloaking enabled.
MSI (c) (FC:A8) [11:16:13:472]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (FC:A8) [11:16:13:580]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (C0:74) [11:16:14:505]: Grabbed execution mutex.
MSI (s) (C0:28) [11:16:14:552]: Resetting cached policy values
MSI (s) (C0:28) [11:16:14:552]: Machine policy value 'Debug' is 0
MSI (s) (C0:28) [11:16:14:552]: ******* RunEngine:
           ******* Product: C:\WINDOWS\system32\config\SYSTEM~1\LOCALS~1\Temp\{0873C~1\pkg_1\exec\Kaspersky Network Agent.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (C0:28) [11:16:14:567]: Note: 1: 2203 2: C:\WINDOWS\system32\config\SYSTEM~1\LOCALS~1\Temp\{0873C~1\pkg_1\exec\Kaspersky Network Agent.msi 3: -2147287037
MSI (s) (C0:28) [11:16:14:582]: MainEngineThread is returning 3
MSI (c) (FC:A8) [11:16:14:598]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
MSI (c) (FC:A8) [11:16:14:598]: MainEngineThread is returning 3
=== Verbose logging stopped: 08/04/2015  11:16:14 ===

$klnagent-setup.log

============================================================================
===== Trace Log File. Pid=2332 (0x91C). Started - 08.04.2015 11:16:10.295. =====
==================== Timestamp - May 20 2013 13:20:57. =================
============================================================================
System: 'Microsoft Windows NT', Version: '5.2, 3790, Service Pack 2', Locale: 'English_Ireland.1252'
08.04.2015 11:16:10.295  0000091C.000008F8 L4  SETUP: CmdLine=/s /norestart RI_ID=2f5092af-e6e3-4924-a327-744b5dd773fe
08.04.2015 11:16:10.295  0000091C.000008F8 L1  SETUP: CInstaller::Initialize().
08.04.2015 11:16:10.295  0000091C.000008F8 L3  KLSTD: KLSTD_CreateDirectory('C:\WINDOWS\Temp\klnagent-2015-04-08-11-16-10\', 1)
08.04.2015 11:16:10.295  0000091C.000008F8 L4  SETUP: Starting CInstaller::PreInstall...
08.04.2015 11:16:10.295  0000091C.000008F8 L4  SETUP: ...CInstaller::PreInstall took 0.024311 ms (User: 0 ms, Kernel: 0 ms, FullLoad: 0 %)
08.04.2015 11:16:10.295  0000091C.000008F8 L4  SETUP: Starting CInstaller::Install...
08.04.2015 11:16:10.295  0000091C.000008F8 L3 INSTALL_UTILS: LaunchAppGetExitCode: wstrCmdLine = "msiexec" /i "C:\WINDOWS\system32\config\SYSTEM~1\LOCALS~1\Temp\{0873C~1\pkg_1\exec\Kaspersky Network Agent.msi" /qn /l*v "C:\WINDOWS\Temp\$klnagent-2015-04-08-11-16-10.log" REBOOT=ReallySuppress RESULTFILE="C:\WINDOWS\Temp\klnagent-2015-04-08-11-16-10\aba0c774-3109-41b2-9d5f-e924c18a83c8" TEMP_FOLDER="C:\WINDOWS\Temp\klnagent-2015-04-08-11-16-10\" SSINSTALL="C:\WINDOWS\Temp\klnagent-2015-04-08-11-16-10\ss_install.xml" RI_ID=2f5092af-e6e3-4924-a327-744b5dd773fe REINSTALL=ALL REINSTALLMODE=voums, wstrCurrentDir = , nShowWindow = 1, dwWaitTimeout = 4294967295
08.04.2015 11:16:14.752  0000091C.000008F8 L1  SETUP: CInstaller::Install = 1619
08.04.2015 11:16:14.752  0000091C.000008F8 L4  SETUP: ...CInstaller::Install took 4521.204738 ms (User: 0 ms, Kernel: 0 ms, FullLoad: 0 %)
08.04.2015 11:16:14.752  0000091C.000008F8 L4  SETUP: ResultCode=1619
============================================================================
========== Trace Log File. Pid=2332 (0x91C). Closed - 08.04.2015 11:16:14.752 ============
============================================================================

sccm appenforce.log

+++ Starting Install enforcement for App DT "Kaspersky" ApplicationDeliveryType - ScopeId_E1EE1955-1F96-4BCC-B20C-7F63C6B2C8C6/DeploymentType_e624ddd4-99b0-4616-8fe0-d85b837b0bb6, Revision - 11, ContentPath - C:\WINDOWS\ccmcache\1, Execution Context - System AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
    A user is logged on to the system. AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
    Performing detection of app deployment type Kaspersky(ScopeId_E1EE1955-1F96-4BCC-B20C-7F63C6B2C8C6/DeploymentType_e624ddd4-99b0-4616-8fe0-d85b837b0bb6, revision 11) for system. AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
+++ Application not discovered. [AppDT Id: ScopeId_E1EE1955-1F96-4BCC-B20C-7F63C6B2C8C6/DeploymentType_e624ddd4-99b0-4616-8fe0-d85b837b0bb6, Revision: 11] AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
    App enforcement environment:
 Context: Machine
 Command line: setup.exe /s
 Allow user interaction: No
 UI mode: 1
 User token: null
 Session Id: 0
 Content path: C:\WINDOWS\ccmcache\1
 Working directory:  AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
    Prepared working directory: C:\WINDOWS\ccmcache\1 AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
    Prepared command line: "C:\WINDOWS\ccmcache\1\setup.exe" /s AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
    Executing Command line: "C:\WINDOWS\ccmcache\1\setup.exe" /s with user context AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
    Working directory C:\WINDOWS\ccmcache\1 AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
    Post install behavior is BasedOnExitCode AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
    Waiting for process 1472 to finish.  Timeout = 120 minutes. AppEnforce 08/04/2015 16:33:39 752 (0x02F0)
    Process 1472 terminated with exitcode: 4294967295 AppEnforce 08/04/2015 16:39:35 752 (0x02F0)
    Looking for exit code -1 in exit codes table... AppEnforce 08/04/2015 16:39:35 752 (0x02F0)
    Matched exit code 4294967295 to a PendingSoftReboot entry in exit codes table. AppEnforce 08/04/2015 16:39:35 752 (0x02F0)
++++++ App enforcement completed (355 seconds) for App DT "Kaspersky" [ScopeId_E1EE1955-1F96-4BCC-B20C-7F63C6B2C8C6/DeploymentType_e624ddd4-99b0-4616-8fe0-d85b837b0bb6], Revision: 11, User SID: ] ++++++ AppEnforce 08/04/2015 16:39:35 752 (0x02F0)

* for -1 exit code I associate soft reboot in app settings so now windows 7 continue the installation without sccm agent 

If Couldn't able to remote configMgr 2012 clients getting below error as per attached screen shot Please follow the below steps

1. Uninstall the SCCM Client 

2. Re-build the Repository

3. Remove the SMS folder from Regedit

5. Install the Client freshly 

Then try to access - it will work am sure 

Best Regard's Krishna

I have a task sequence created for an application office 2013. I configured this to "download all contents locally before running task sequence". The report says that the donwload content is completed. But, I couldn't see the content any where on the client machine.

I verified under ccmcache, under C drive and C:\Windows.

Where would be the content download location for task sequence based application.

what is the best option while packaging a .msp file using SCCM 2012?

whether it should be packaged as an application or a package?

application deployment user experience settings fields like commit changes at deadline or during a maintenance window (requires restarts)  when the installation deadline is reached allow the following activities to be performed outside the maintenance window software installation and system restarts

question what is behavior of checking and unchecking these options?

Folks,

I am getting clients installation failed exit code 1624 and

Hi!

SCCM 2012 St.

How deploying Console only install. 

cenubit

Hi We have just added another Distribution Point to a Boundary Group but the clients still get there data from the first one. I have checked in the CAS log and can see this:

Download location found 0 - http://server1.domain.com/SMS_DP_SMSPKG$/e33da686-a77f-49e2-b406-49ddb9bab1c4 ContentAccess 2015-03-24 02:04:31 3828 (0x0EF4)

Download location found 1 - http://server2.domain.com/SMS_DP_SMSPKG$/e33da686-a77f-49e2-b406-49ddb9bab1c4 ContentAccess 2015-03-24 02:04:31 3828 (0x0EF4)

But the clients still downloads from Server1 that was the first server in the Boundary Group. The DPs have the same Operating System, Server 2008 R2 and both are virtual. How does the client choose a Distribution Point when they are assigned two from the Boundary Group? 

Mikael Karlsson

Hi,

In our organization we have small group of users, who has rights to install any software on their PC's. Of course, they are getting these rights only form some reason e.g. special knowledge for install or configuration specific application. Unfortunately our users use this right to install any applications. We would like to know what has been installed by them to stop them for installing e.g. computer games :-) 

So... my question is: it is possible to compare standard, fresh installed PC with user device after few weeks of use that?

Thank you for any advice.

I am installing an MSI using a task sequence command line.

The program should create an icon in the C:\Users\Public\Desktop folder.

Whenever I run the program without specifying an account (Run this step as the following account) it installs correctly but it does not create the icon.

Whenever I specify the sccm domain account which has full domain administrator rights and access to this folder it fails to install the program at all UNLESS I have logged into the workstation with the sccm account, if I have already logged into the box it runs perfectly and create the icon fine...

Here is the log file of the failing install-

<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="16:33:41.911-60" date="04-13-2015" component="TSManager" context="" type="1" thread="1348" file="instruction.cxx:751">
<![LOG[Expand a string: WinPEandFullOS]LOG]!><time="16:33:41.911-60" date="04-13-2015" component="TSManager" context="" type="0" thread="1348" file="executionenv.cxx:782">
<![LOG[Executing command line: smsswd.exe /run:NDC0002B msiexec /i "Sectra RIS Client 16.1.15 Basic Install.msi" STRSERVERNAME="BCDVTRNRIS01.NIPACS.NET" INSTALLDIR="D:\Program Files (x86)\Sectra\" SPEECH_INSTALL_AS_WINDOWS_SERVICE=1 SPEECH_INI_REMOTE_SERVICE_HOST_NAME="BCDVTRNRIS01.NIPACS.NET" SPEECH_INI_DOWNLOAD_FREQUENCY=180 SPEECH_INI_REMOTE_FILE_TRANSFER_PORT_NUMBER=6005 SPEECH_INI_REMOTE_SERVICE_PORT_NUMBER=6000 SPEECH_INI_UPLOAD_FREQUENCY=30 /qn]LOG]!><time="16:33:41.911-60" date="04-13-2015" component="TSManager" context="" type="1" thread="1348" file="commandline.cpp:827">
<![LOG[[ smsswd.exe ]]LOG]!><time="16:33:41.925-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="main.cpp:289">
<![LOG[PackageID = 'NDC0002B']LOG]!><time="16:33:41.930-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="main.cpp:318">
<![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="16:33:41.930-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="main.cpp:319">
<![LOG[ProgramName = 'msiexec /i "Sectra RIS Client 16.1.15 Basic Install.msi" STRSERVERNAME="BCDVTRNRIS01.NIPACS.NET" INSTALLDIR="D:\Program Files (x86)\Sectra\" SPEECH_INSTALL_AS_WINDOWS_SERVICE=1 SPEECH_INI_REMOTE_SERVICE_HOST_NAME="BCDVTRNRIS01.NIPACS.NET" SPEECH_INI_DOWNLOAD_FREQUENCY=180 SPEECH_INI_REMOTE_FILE_TRANSFER_PORT_NUMBER=6005 SPEECH_INI_REMOTE_SERVICE_PORT_NUMBER=6000 SPEECH_INI_UPLOAD_FREQUENCY=30 /qn']LOG]!><time="16:33:41.930-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="main.cpp:320">
<![LOG[SwdAction = '0001']LOG]!><time="16:33:41.930-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="main.cpp:321">
<![LOG[Getting linked token]LOG]!><time="16:33:41.979-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="runcommandline.cpp:334">
<![LOG[failed to get the linked token information. It may not be available. Error 1312]LOG]!><time="16:33:41.979-60" date="04-13-2015" component="InstallSoftware" context="" type="2" thread="652" file="runcommandline.cpp:341">
<![LOG[ResolveSource flags: 0x00000000]LOG]!><time="16:33:42.113-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="resolvesource.cpp:3201">
<![LOG[SMSTSPersistContent: . The content for package NDC0002B will be persisted]LOG]!><time="16:33:42.113-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="resolvesource.cpp:3212">
<![LOG[Resolved source to 'F:\_SMSTaskSequence\Packages\NDC0002B']LOG]!><time="16:33:42.113-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="runcommandline.cpp:453">
<![LOG[Working dir 'F:\_SMSTaskSequence\Packages\NDC0002B']LOG]!><time="16:33:42.113-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="runcommandline.cpp:546">
<![LOG[Executing command line: Run command line]LOG]!><time="16:33:42.113-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="commandline.cpp:827">
<![LOG[Process completed with exit code 1603]LOG]!><time="16:33:42.647-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="commandline.cpp:1123">
<![LOG[Command line returned 1603]LOG]!><time="16:33:42.647-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="652" file="runcommandline.cpp:569">
<![LOG[Process completed with exit code 1603]LOG]!><time="16:33:42.663-60" date="04-13-2015" component="TSManager" context="" type="1" thread="1348" file="commandline.cpp:1123">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="16:33:42.664-60" date="04-13-2015" component="TSManager" context="" type="1" thread="1348" file="instruction.cxx:804">
<![LOG[Failed to run the action: Install RIS Basic Install.
Fatal error during installation. (Error: 00000643; Source: Windows)]LOG]!><time="16:33:42.664-60" date="04-13-2015" component="TSManager" context="" type="3" thread="1348" file="instruction.cxx:895">
<![LOG[Set authenticator in transport]LOG]!><time="16:33:42.665-60" date="04-13-2015" component="TSManager" context="" type="0" thread="1348" file="libsmsmessaging.cpp:7734">
<![LOG[Set a global environment variable _SMSTSLastActionRetCode=1603]LOG]!><time="16:33:42.831-60" date="04-13-2015" component="TSManager" context="" type="0" thread="1348" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSLastActionSucceeded=false]LOG]!><time="16:33:42.832-60" date="04-13-2015" component="TSManager" context="" type="0" thread="1348" file="executionenv.cxx:668">
<![LOG[Clear local default environment]LOG]!><time="16:33:42.832-60" date="04-13-2015" component="TSManager" context="" type="0" thread="1348" file="executionenv.cxx:807">
<![LOG[Let the parent group (RIS 16.1.15 Install) decides whether to continue execution]LOG]!><time="16:33:42.837-60" date="04-13-2015" component="TSManager" context="" type="0" thread="1348" file="instruction.cxx:1004">
<![LOG[The execution of the group (RIS 16.1.15 Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)]LOG]!><time="16:33:42.839-60" date="04-13-2015" component="TSManager" context="" type="3" thread="1348" file="instruction.cxx:217">
<![LOG[Failed to run the last action: Install RIS Basic Install. Execution of task sequence failed.
Fatal error during installation. (Error: 00000643; Source: Windows)]LOG]!><time="16:33:42.839-60" date="04-13-2015" component="TSManager" context="" type="3" thread="1348" file="engine.cxx:213">

And this is the log of a successful install-

<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="16:43:46.776-60" date="04-13-2015" component="TSManager" context="" type="1" thread="1440" file="instruction.cxx:751">
<![LOG[Expand a string: WinPEandFullOS]LOG]!><time="16:43:46.776-60" date="04-13-2015" component="TSManager" context="" type="0" thread="1440" file="executionenv.cxx:782">
<![LOG[Executing command line: smsswd.exe /run:NDC0002B msiexec /i "Sectra RIS Client 16.1.15 Full Configuration UK.msi" /qn]LOG]!><time="16:43:46.776-60" date="04-13-2015" component="TSManager" context="" type="1" thread="1440" file="commandline.cpp:827">
<![LOG[[ smsswd.exe ]]LOG]!><time="16:43:46.787-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="main.cpp:289">
<![LOG[PackageID = 'NDC0002B']LOG]!><time="16:43:46.792-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="main.cpp:318">
<![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="16:43:46.792-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="main.cpp:319">
<![LOG[ProgramName = 'msiexec /i "Sectra RIS Client 16.1.15 Full Configuration UK.msi" /qn']LOG]!><time="16:43:46.792-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="main.cpp:320">
<![LOG[SwdAction = '0001']LOG]!><time="16:43:46.792-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="main.cpp:321">
<![LOG[ResolveSource flags: 0x00000000]LOG]!><time="16:43:46.792-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="resolvesource.cpp:3201">
<![LOG[SMSTSPersistContent: . The content for package NDC0002B will be persisted]LOG]!><time="16:43:46.792-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="resolvesource.cpp:3212">
<![LOG[Resolved source to 'F:\_SMSTaskSequence\Packages\NDC0002B']LOG]!><time="16:43:46.792-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="runcommandline.cpp:453">
<![LOG[Working dir 'F:\_SMSTaskSequence\Packages\NDC0002B']LOG]!><time="16:43:46.792-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="runcommandline.cpp:546">
<![LOG[Executing command line: Run command line]LOG]!><time="16:43:46.793-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="commandline.cpp:827">
<![LOG[Process completed with exit code 0]LOG]!><time="16:43:47.112-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="commandline.cpp:1123">
<![LOG[Command line returned 0]LOG]!><time="16:43:47.112-60" date="04-13-2015" component="InstallSoftware" context="" type="1" thread="1968" file="runcommandline.cpp:569">
<![LOG[Process completed with exit code 0]LOG]!><time="16:43:47.113-60" date="04-13-2015" component="TSManager" context="" type="1" thread="1440" file="commandline.cpp:1123">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="16:43:47.113-60" date="04-13-2015" component="TSManager" context="" type="1" thread="1440" file="instruction.cxx:804">
<![LOG[Successfully completed the action (Install RIS Full Configuration) with the exit win32 code 0]LOG]!><time="16:43:47.113-60" date="04-13-2015" component="TSManager" context="" type="1" thread="1440" file="instruction.cxx:830">
<![LOG[Set authenticator in transport]LOG]!>

Any ideas?

I need to create desktop shortcuts using the Office Customization Tool. But how does one do this when they have both 32 and 64 bit machines in the environment? The "Start In" path below is obviously going to be different when dealing with 32 and 64 bit OS machines (c:\program files vs c:\program files(x86))

I'm following these directions but they look to be specific to a 64 bit machine: http://mystang69.blogspot.com/2013/08/office-customisation-tool-2013-adding.html

Hi,

I was hoping to get peoples input on supersedence in SCCM 2012.

In my view it seems rather backwards with how it is configured. Here is my example as to why. Very interested to see if anyone agrees or suggestions on what others are doing.

There is an application lets call it "Program A". I input a version for it in the main Application screen. I create a Deployment type and deploy it. All works well.

I now have a new version of this program. Now this is where I feel it goes backwards. In order to now deploy this update common sense to me says I should simply create a new deployment type and tell it within that that this is the updated version. I update the version number in the main application window and off I go. SCCM Automatically updates the distribution points with the new version, removing the old one and "re advertises" the current deployment to link to the new version.

However as I understand it this is what needs to happen:

• Create a completely a "New" Application. "Program A v2" (What is the point of a version number if you need it in the name of it to ensure its unique)
• Create a completely new deployment type.
• Tell this new application that it supersedes the old application.

(I now have 2 applications called the same thing with a version number in the name as you cant have duplicates.)

• Create a new deployment for "Program A v2"
• Remove the deployment for "Program A"

I now have 2 applications for the same program.

I struggle understanding the point of this. Why even both creating a relationship between the 2 programs? Adding in the supersedence relationship actually makes the take longer.

Zac Avramides

Hi All,

Using SCCM 2012 SP1 CU5 to deploy applications/packages. All distribution points and boundary groups are configured and working correctly. What I've discovered is that some of the applications are stuck at downloading 0%, and software center eventually fails with "The software change returned error code 0x87D00607(-2016410105).", which is saying that the content is not available. I checked the distribution point and the content is not available. I push out the application, but it seems like it doesn't distribute it to the DP.

All DP's are VMs and running Windows 7.