Hello experts,
Could help me out to deploy universal app using SCCM. I have to deploy custom Universal app (not windows store App) using SCCM.
Thanks
RICHKM
↧
how to deploy universal app using sccm12
↧
SCCM 2012: App-v 5 installation "past due, will be retried", while it is installed.
Hi,
As title mentions, within an SCCM 2012-client, I have the message: App-v 5 installation "past due, will be retried", while it is installed.
Screenshot below to clarify, please advise:
Jan Hoedt
↧
↧
Prompted for user name and password on client machines when deploying applications
Hi Folks,
I have successfully pushed the applications to Distribution Point and clients can see the application available under Software centre however the installation status is failed. When i manually click on retry to install the applications, i am prompted with user name and password. I have used service account when creating and deploying the package and service account is member of domain admin groups. The domain admin group is member of local administrator group on client machines. Not sure what is causing the username/password prompt.
Any ideas where to start looking to narrow down and resolve the issue?Regards, Navdeep
↧
software centre
how to reset software centre...??
↧
Error installing applications as part of Task Sequence
Hi,
I have created a Task Sequence to install a Windows 10 image onto a test machine which works fine. I then tried to create an additional Task Sequence which included applications as part of the process. Once the OS is deployed, restarts I get the error message:
"Failed to run the last action: Install Applications. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)".
The machine then restarts and boots to the Windows log in screen with the OS deployed successfully. Looking at the smsts log doesn't provide me with any obvious answers as to why the applications are failing to install. I have ticked the option to allow the application to be installed as part of a task sequence and all applications install silently when deployed to a collection in SCCM.
Is there anything I am missing?
Thank you
↧
↧
Problem with applications after content validation process
Hi,
I have found interesting issue in my SCCM DP's. On few DP's, after weekly Content Validation process, few of applications, change status on "The package may not be present or may be corrupt. Please redistribute it". I have of course redistributed application and when it hasn't helped, I have removed totally and distributed again. Of course it works only till next Content Validation.
Strange is, even if applications change status on failed, it is installing on users PC, without any problem.
Have you found something similar on your SCCM environment and if yes, how to fix it?
Thank you.
↧
Uninstall Office 365 failing
We have O365 Business edition (en-us and lv-lv) installed which I need to remove
I have in my SCCM 2012 R2 Package ODT setup.exe file and uninstall.xml
setup.exe /configure uninstall.xml
<Configuration><remove ALL="TRUE" />
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="OfficeRemoval.log" Path="%temp%" />
</Configuration>
I see that package installed successfully but Program and Features show that Office 365 is in place and no log file created.
I see in Windows\temp different log file name and there is some info, which do not give me any useful info.
TimestampProcessTIDAreaCategoryEventIDLevelMessageCorrelation05/25/2016 16:33:06.218SETUP (0xf8c)0x11a0Telemetry Rules Enginea2wjzMediumStart processing idle queue job
05/25/2016 16:33:06.220SETUP (0xf8c)0x11a0Scopea5ia1Medium{"ScopeAction": "Start", "ScopeName": "Mso::Telemetry::RuleManager::LoadXmlRules", "ScopeInstance": 2, "ScopeParentInstance": 0, "TopActivityInstance": 2}070E8D26-2B4B-41F5-BF93-1132D3762DE9
05/25/2016 16:33:06.220SETUP (0xf8c)0x11a0OfficeTelemetry_RuleProcessingaxbjwMediumOTele_ETW_TDC_LoadingRulesStarted {"ETW_EventId": 119, "ETW_Keywords": 4}070E8D26-2B4B-41F5-BF93-1132D3762DE9
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Run General TelemetryaqkhcMedium::InitLogging {"MachineId": "905dd1e054e5ee45b89324498bb6224b", "SessionID": "1c84a07c-d69e-4257-8c7e-9a0df5990080", "GeoID": 140, "Ver": "0.0.0.0", "C2RClientVer": "0.0.0.0","ContextData": "{'ModulePath':'C:\\WINDOWS\\ccmcache\\a\\setup.exe','CommandLine':'/configure uninstall.xml','Bitness':'32','IntegrityLevel':'0x4000','SecuritySessionId':'0','ExeVer':'16.0.6612.6353','ProcessType':'ODT'}"}
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Run General TelemetryaqkheMedium::InitLogging {"MachineId": "905dd1e054e5ee45b89324498bb6224b", "SessionID": "1c84a07c-d69e-4257-8c7e-9a0df5990080", "GeoID": 140, "Ver": "0.0.0.0", "C2RClientVer": "0.0.0.0","ContextData": "{'OSVersion':'6.1','SP':'0','ProductType:'0','ProcessorArch':'9','Locale':'1062'}"}
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Runarql8MediumArgs::ParseArgument: Parsing commandline.
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-RunarqmbMediumArgs::Load: Have Admin scenario
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Runarql9MediumArgs::GetNextArgument: Next argument: /configure
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Runarql9MediumArgs::GetNextArgument: Next argument: uninstall.xml
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Runaoh7yMediumArgs::GetConfigFile: config file: uninstall.xml
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-RunappfqMediumArgs::Load: product release id: none culture: en-us
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Runapvr9MediumTrySetUserRegistry::TrySetAttemptGetKey: Setting Attempt Get Key for none
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Run General Telemetryayef6MediumTrySetUserRegistry::TrySetLicenseTokenOrKey {"MachineId": "905dd1e054e5ee45b89324498bb6224b", "SessionID": "1c84a07c-d69e-4257-8c7e-9a0df5990080", "GeoID": 140, "Ver": "0.0.0.0", "C2RClientVer":"0.0.0.0", "ContextData": "No key or token found for none"}
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Runaoh76MediumHandleCommandLineAction::HandleStateAction: Not OOD scenario nor showing ODT help, check for elevation.
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Runaoh8lMediumTryGetElevation::HandleStateAction: Already running from elevated context.
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Runaoh78MediumHandleCommandLineAction::HandleStateAction: Starting Admin tool scenario.
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-Runaoh8dMediumHandleCommandLineAction::HandleStateAction: Start installation with configuration file: uninstall.xml
05/25/2016 16:33:06.225SETUP (0xf8c)0xe70Click-To-RunanwvzMediumConfiguration::Load: Using config file: uninstall.xml
05/25/2016 16:33:06.233SETUP (0xf8c)0xe70Click-To-RunanwvyMediumConfigFile::ParseAttribute: Value of Level: None
05/25/2016 16:33:06.233SETUP (0xf8c)0xe70Click-To-RunanwvyMediumConfigFile::ParseAttribute: Value of AcceptEULA: TRUE
05/25/2016 16:33:06.233SETUP (0xf8c)0xe70Click-To-RunanwvyMediumConfigFile::ParseAttribute: Value of Path: %temp%
05/25/2016 16:33:06.233SETUP (0xf8c)0xe70Click-To-Runaon8kMediumCabManager::DetermineCabName: Type:0, Platform:x86, Version:, Culture: -> v32.cab
05/25/2016 16:33:06.233SETUP (0xf8c)0xe70Click-To-Runaon8kMediumCabManager::DetermineCabName: Type:0, Platform:x86, Version:, Culture: -> v32.cab
05/25/2016 16:33:06.233SETUP (0xf8c)0xe70Click-To-Runaon8kMediumCabManager::DetermineCabName: Type:0, Platform:x86, Version:, Culture: -> v32.cab
05/25/2016 16:33:06.234SETUP (0xf8c)0xe70Click-To-Runarqm4MediumBaseConfigure::TryGetConfiguration: EULA's have been accepted.
05/25/2016 16:33:06.234SETUP (0xf8c)0xe70Click-To-RunauhiwMediumBootstrapperContext::UpdateSplashScreen: UI has been disabled.
05/25/2016 16:33:06.234SETUP (0xf8c)0xe70Click-To-Runarqm6MediumAdminConfigure::HandleStateAction: No product changes. Configuring an Update settings scenario.
05/25/2016 16:33:06.235SETUP (0xf8c)0xe70Click-To-Runarqo1MediumConfigureUpdatesSettings::HandleStateAction: Installation path is: C:\Program Files\Common Files\Microsoft Shared\ClickToRun
05/25/2016 16:33:06.235SETUP (0xf8c)0xe70Click-To-Runarqo2MediumConfigureUpdatesSettings::HandleStateAction: Have Office ClickToRun Client.
05/25/2016 16:33:06.235SETUP (0xf8c)0xe70Click-To-Runarqo3MediumConfigureUpdatesSettings::HandleStateAction: Updating configuration settings.
05/25/2016 16:33:06.235SETUP (0xf8c)0xe70Click-To-Runarqo5MediumConfigureUpdatesSettings::HandleStateAction: Completed settings updates.
05/25/2016 16:33:06.235SETUP (0xf8c)0xe70Click-To-Runaoh72MediumExitBootStateMachine::HandleStateAction: Bootstrapper workflow exiting with result: 0x0
05/25/2016 16:33:06.235SETUP (0xf8c)0xe70Click-To-Run General TelemetryarqpmMediumAdminBootstrapper::Main {"MachineId": "905dd1e054e5ee45b89324498bb6224b", "SessionID": "1c84a07c-d69e-4257-8c7e-9a0df5990080", "GeoID": 140, "Ver": "0.0.0.0", "C2RClientVer":"0.0.0.0", "ContextData": "AdminBootstrapper::Main: Installation came back with 0."}
05/25/2016 16:33:06.235SETUP (0xf8c)0x11a0Logging Libletbce0tUnexpectedCall to GetPackageVersionToReport failed. {"SH_ErrorCode": -2147467259}
05/25/2016 16:33:06.239SETUP (0xf8c)0x11a0Nexus Transporta426jUnexpectedMsoGetRemoteHostNetworkStatusWithUrlType failed {"RemoteHost": "https://nexus.officeapps.live.com"}
How to uninstall O365 completely from system?
↧
Application Deployment - Clients Stuck in Unknown Status - Client Check/Active
I'm attempting to deploy out a small, 1MB MSI file to roughly 3000 computers, and I've run into an issue where at several of our office locations (between 5-10 clients), all of the clients seem to be stuck in the Unknown - Client Check/Active state.
All the clients appear to be healthy, and the content is available on the distribution point at that location. I've seen plenty of posts along these lines that deal with Windows Updates, but nothing regarding an application deployment. Has anyone
run into this specifically, or provide me with some direction on this issue?
Thanks! Nate
↧
SCCM2012 How deploying Console only install
Hi!
SCCM 2012 St.
How deploying Console only install.
I set up a package from definition to \\server\SMS_S01\bin\i386\adminconsole.msi but the install attempts ended in error.I tried this:
msiexec /i “adminconsole.msi” DEFAULTSITESERVERNAME=”SERVER.LOCAL” TargetDir=”%programfiles%\SCCM2012Console” /qn
does not work well.
Is the solution?
cenubit
↧
↧
Application Catalog - Install with User rights
Hello Everyone,
I would like to use the Application Catalog so my users can install anything themselves. But as i saw and tested if you are trying to run an executable file from the App Catalog with a user (and of course with user rights) it will fail. If you do the same with an Administrator account it works well.
The MSI applications are a little bit different. When I tried to install an MSI with user rights, seemingly it has been installed and worked perfectly but when i tried to install any updates for this program (in my case it was the Adobe Reader X) the MSP file said it couldn't be installed because the core program is missing. So it looks like the MSI can install but only in the user profile (of course if you log in with another user you cannot see the program and you cannot use it) which in my case is not good.
Does anyone have any experience or idea how i should set up my SCCM so the user is able to install any kind of Application from Application Catalog? I found a 3rd party software which can run programs with a different account name (e.g.:local adminsitrator) but i want to solve this with the SCCM if it's possible.
Thanks in advance.
Brgds.
Tamas
↧
Automation Studio 6.2 will not install via SCCM 2012
Hello,
I am trying to use SCCM 2012 to install Automation Studio 6.2 silently, in SCCM I simply navigate to the folder we have the files in on our UNC path and invoke "setup.exe -s". The setup is able to start on the PC (I actually see the setup in the task manager) but it does not finish. I can make it fully install when doing it manually. So I tried just invoking the setup.exe without silent install, it brings up the setup but seems to fail at installing the sentinel driver. Here is the part of the log file where it seems to fail, any ideas?
[006C:1744][2016-05-26T13:39:43]i301: Applying execute package: SentinelDriver, action: Install, path: C:\ProgramData\Package Cache\9CB5F548E0854659CACB7C8B05D8660C990D04F9\..\Automation Studio Prerequisites\SentinelDriver, arguments: '"C:\ProgramData\Package Cache\9CB5F548E0854659CACB7C8B05D8660C990D04F9\..\Automation Studio Prerequisites\SentinelDriver" /s /V"/qn ADDLOCAL=Parallel_Driver,USB_Driver REBOOT=ReallySuppress"'[006C:1744][2016-05-26T13:39:50]e000: Error 0x80070653: Process returned error: 0x653
[006C:1744][2016-05-26T13:39:50]e000: Error 0x80070653: Failed to execute EXE package.
[11C4:0E60][2016-05-26T13:39:50]e000: Error 0x80070653: Failed to configure per-machine EXE package.
[11C4:0E60][2016-05-26T13:39:50]i000: T1 Wpf UI execute package complete SentinelDriver
[11C4:0E60][2016-05-26T13:39:50]i319: Applied execute package: SentinelDriver, result: 0x80070653, restart: None
[11C4:0E60][2016-05-26T13:39:50]e000: Error 0x80070653: Failed to execute EXE package.
[006C:1744][2016-05-26T13:39:50]i351: Removing cached package: SentinelDriver, from path: C:\ProgramData\Package Cache\9CB5F548E0854659CACB7C8B05D8660C990D04F9\
↧
Deploying PowerShell Command Line via SCCM
Hi IT Professonals,
I am attempting to deploy a PowerShell script that removes all but the built-in XPS, Fax and OneNote Windows 7 printers.
I currently work in a 2012 R2 Domain Level, Windows 7 environment.
I am attempting to create a deployment package within SCCM that runs the following PowerShell script:
# Get Printers
$printers = Get-WmiObject -Class Win32_Printer
# Delete Printers
$printers | ForEach-Object {
if ($_.Name -like "*XPS*" -Or $_.Name -like "*Fax*" -Or $_.Name -like "*OneNote*")
{
}
else
{
$_.Delete()
}
}
I guess this could be converted into a general question in regards to how to deploy a .ps1 script via SCCM, but I have managed to Create a program within SCCM that runs: powershell.exe -ExecutionPolicy Bypass -File .\RemoveAllPrinters
And I have ensured that the Startup folder points to the UNC path to the directory where this PowerShell script is housed
The script runs as the current user permissions, and receives error -196608
Is this the right way to go?
Thank you in advance,
Daniel
Daniel Scoland Windows 7 Professional SharePoint 2010 Microsoft Office 2010
↧
AppCatalog display apps limit
Hi ,
I have requirement, How far it's possible as I could not able to find anything in TechNet site .
If you refer the enclosed snap, displaying 37 apps, I want to more apps in first page itself but it's moving 2nd page even though space available on 1st page bottom.
Any help ?
Please click answer If it works Thanks KMI
↧
↧
Getting error while creating application package
Hi,
the publisher of "Firefox Setup 46.0.1.msi file could not be verified. are you sure that you want to import this file??
I have select yes and create application package, distributed and deployed on one collection. on client system application not installed and getting below error in
↧
SQL Query to get "Installed By" for each software installed on a computer
I need to fetch "Installed By" (who installed like System, User) for each software installed on a computer. Is there any table for SCCM which contains this info?
↧
SCCM 2012 to deploy Outlook 2013
Is there a setting in OCT for Office 2013 deployment - for Outlook 2013 to automatically create Outlook profile when user's start-up outlook? / based on their Primary SMTP address in AD?
Thank you
↧
Software inventory not updating in Resource explorer
Hi,
We have CAS, 4 Primary, SS and DP in our environment. we have uninstalled manually few software's from machines which are not showing in add/ remove programs but even after 2-3 days resource explorer is not showing updated inventory. Checked Inventoryagent.log file from client which shows "Inventory: Successfully sent report. Destination:mp:MP_SinvEndpoint" but still clients are not showing updated records in resource explorer and still reflecting in reports. It is observed that report is updating very slow
↧
↧
SCCM 2012 R2 Application Detection Method File System Folder not working
Hi,
I have a problem with the Application Detection Method for a Folder in the File System.
To detect if a certain application is installed we use the MSI Product code which functions well for this application. However in some cases the MSI did not install correctly or somehow the installation folder (C:\Program Files (x86)\Vips ;(for X64) -or- C:\Program
Files\Vips ;(for X86)) was not available. Therefore we also added a detection method for a for this installation folder. But when I remove the folder to trigger a repair for this installation nothing happens. However when I uninstall the application from Programs
and Features it is reinstalled when I trigger the application evaluation.
So it seems the Folder detection does not function as I expected.
(added some pics but am not able to insert until my account is verified?)
Can someone please help me on this issue?
↧
Application distribution is taking a long time to complete to the distribution point
Dear Experts,
We are using SCCM Version 1602 - With Single Primary & Few Secondary Sites in our environment, we are facing an issue with content distribution to a distribution point. we are distribution content from our primary site to the secondary site and Distribution points.
Content is getting distributed to all the secondary sites and distribution points. But we have seen issues with 3 distribution points. these distribution points are getting content from secondary site servers. even for a small package of size 50MB is taking more than 24 hours only for these 3 distribution points we are seeing only"starting to process the content" "Start to Evaluate" or "Waiting for content" under monitoring in console.
Troubleshooting steps tried:
Checked the distmgr, PkgXferMgr, despool,sender logs we are unable to see any issues from these logs there is no error message or failures.
Re-distributed the content the status has not changed waited for more than 24 hours then removed the content and distributed to the distribution point no change. removed the content from administrator console and removed the content from the distribution point and re-triggered the content to the distribution point no change in the status.
we were able to access the admin$ share from the primary and secondary servers to the DP and from DP also also it is working fine without issues.
Checked IIS is up and running
Rebooted the distribution points which is having issues and restarted sms executive services in the primary server even then the status has not changed,
Kindly share us the other troubleshooting steps that can be done to fix this issue.
Thanks
Balaji S
↧
OCT for Office 2013 deployment
moved
↧