Will there be a problem if I deploy .exe of flash player installer to these users now and then push next flash update from scup? Thanks in advanced.
↧
Install flash activex exe and msi
↧
Error while importing Application
I have a multi-domain environment and am working on exporting applications from one SCCM environment to another. Both are ConfigMgr 2012 R2 CU5. And I've already done several export/imports without a problem. The error that I get when I import one of the applications is;
Error: Dependency unresolved, please assign a substitute for object SMS_Application.ModelName='ScopeID21A0F29F-833B-4D13-B763-75D5B28635F6/Application_a499118f-c9df-4a29-8e30-f1d4ecccb01b',CIVersion=9. If this object is being migrated, ensure Data Gathering has run on each site since SMS_Application.ModelName='ScopeID21A0F29F-833B-4D13-B763-75D5B28635F6/Application_a499118f-c9df-4a29-8e30-f1d4ecccb01b',CIVersion=9 was modified.
This error references another application. When I import that application I get the same error except that it references the first application. There is a deployment type in the first application that has a dependency that includes the second application and the second application has a deployment type that has a dependency that includes the first application though it's a different deployment type so the references aren't circular. The application installs without a problem. Has anyone come across this kind of error?
↧
↧
Search dialog when adding Applications to Task Sequence
I think I am missing something, but please correct me if it is expected behaviour.
When attempting to add an Application to a Task Sequence, the dialog box does not allow you to search all the subfolders for the application. It only shows the content of the current folder.
Is this correct?
You can use the normal search methods when looking at the Application node to find all Applications that are published, but not in the TS.
Is there any other method to find Applications? We only have a few Apps so far, but I can see this becoming very annoying with large numbers of apps organised into many folders.
↧
Deploying Office 365 ProPlus using office deployment tool
Hi guys, just want to ask if you could help me how can i create the right application package for deploying office 365 proplus?
We are using online installation (Office Deployment Tool).
There is already a existing application package for deploying office 365.
I have .xml and setup.exe and the data from click to run deployment tool.
Content location: \\sccm\office15\
Installation program: setup.exe /configure .\KOFPHconfig.xml
Here is my xml path: (KOFPHconfig.xml)
<Configuration> <Add SourcePath="\\SCCM\Office15\" OfficeClientEdition="32" >
<Product ID="O365ProPlusRetail">
<Language ID="en-us" />
<ExcludeApp ID="Access" />
<ExcludeApp ID="InfoPath" />
<ExcludeApp ID="Publisher" />
</Product> </Add>
<Updates Enabled="TRUE" UpdatePath="\\SCCM\Office15\" /> <Display Level="None" AcceptEULA="TRUE" />
<Logging Path="\\SCCM\Office15\Logs" />
<!-- <Property Name="AUTOACTIVATE" Value="1" /> -->
</Configuration>
Example we have like 10 DP and each DP has like 100 users and deployed the office 365 to users in 10 DP.
How should i know that the client machine is getting the installation of office 365 from their site DP? Are my settings and xml file correct?
Now i have created a new application package for deploying office.
We are using online installation (Office Deployment Tool).
I have .xml and setup.exe and the data from click to run deployment tool.
Content location: \\sccm\office15
Installation program: setup.exe /configure .\KOFPHconfig.xml
Here is my xml file: (KOFPHconfig.xml) without source path
<Configuration>
<Add OfficeClientEdition="32" >
<Product ID="O365ProPlusRetail">
<Language ID="en-us" />
<ExcludeApp ID="Access" />
<ExcludeApp ID="InfoPath" />
<ExcludeApp ID="Publisher" />
</Product>
</Add>
<Updates Enabled="TRUE" />
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="OfficeSetup.txt" Path="%temp%" />
<!-- <Property Name="AUTOACTIVATE" Value="1" /> -->
</Configuration>
After creating the app package i distribute it to two DP the primary and the site DP. I tried manual installation using cmd with path start \\sccm\office15\setup.exe /configure .\KOFPHconfig.xml but i get an error code: 0-1008 (0) Says: Is your internet connection working? (YES) Do you have enough space on your main hard drive? (YES).
Any advice help in deploying office 365 pro plus?
Thank You!
↧
global condition to detect if application was started during a task sequence
hello, Is there a way to use a global condition in the application model to detect if the application was started during a task sequence?
I'm trying not to run the 32 bits version of a program that doesn't work in a TS , but work fine if started from the software center.
thanks
↧
↧
Create Task Sequence Media Wizard: Select Task sequence is empty
Hi Again,
When I try to create Task sequence Media, using the wizard, the select task sequence Media is blank. If you look below you will see the task sequences do exist. I added drivers to the boot media and updated the DPs and this issue started happening. I removed the new boot media and added the old one back, and updated dps again, but still had the issue described.
Thanks in advance,
Mark
↧
Keep track of renamed App-V package
Hi,
We have renamed an App-V package which was installed to 100 computers.
Now the colleciton only shows 10 of the 100 computers with that (renamed) App-V package. A collection we created with the old name doesn't show the other computers either.
Please advise.
J.
Jan Hoedt
↧
Create Task Sequence Media Wizard: Select Task sequence is empty
Hi Again,
When I try to create Task sequence Media, using the wizard, the select task sequence Media is blank. If you look below you will see the task sequences do exist. I added drivers to the boot media and updated the DPs and this issue started happening. I removed the new boot media and added the old one back, and updated dps again, but still had the issue described.
Thanks in advance,
Mark
↧
Retiring OLD Apps
I have old apps that i want to retire.
What are the best practice over here, i saw that if you Right click and APP, there is an Option for Retire, and also for Delete.
What happen when you retire an app for example, that was in task sequence for OSD?
Also, if you Delete and APP, it also delete The files from the Source Folders? What happen with the files in the distribution points?
Thanks in advance guys!
↧
↧
SCCM 2012 Unable to Deploy Package - stuck at 0% compliance
Hello,
I'm having trouble deploying a software package on SCCM.
I have correctly setup
DP's, boundaries, schedule (run immediate), Device collections.
I've run out of steps to check to make sure I have everything setup correctly.
I have another package also at 0% compliance. Both have been distributed to the DP successfully.
↧
Updated Task Sequence can not be re-distributed (DP not available to select)
Created TS & distributed to DP & deployed to Collection. Worked fine.
Updated (edited) TS with extra actions, but now I can not re-distribute the content to DP, as NONE shows
Boot images/packages referenced in TS were NOT changed, TS itself was changed. How do I re-distribute it?
↧
On Linux clients package takes hours to deploy
Hi,
I have a small package (.rpm) of less than 20 KB for a Linux client in SCCM 2012 environment. I have set the client policy refresh to 10 minutes and deployment time out is set to just 20 minutes during the Package creation. In spite of all these it takes more than 2 hours to either throw a success or failure code for this deployment. Whether the package gets a successful deployment or a failed one in both the cases it takes hours to finish.
I am looking for reasons as to why CM takes so much of time for such small installs in case of Linux device and what can be done to improve this response.
I have exhausted every option and looking for some pointers. Thank you.
Maddy PC Analyst Learning Curve
↧
SCCM 2012 .cmd file package deployment - 'Failed'
Hi.
I have created a package that runs a .cmd file to deploy an .exe file silently (with a response file)
When i deploy it, the application installs successfully to the target machine, however in 'Software Centre' it just says 'Installing' as if its still installing and eventually says 'Failed' with 'Error: 0x103(259)'
Do i need to send something back to SCCM to say the application has installed successfully? i.e. something in the .cmd file? Or does this error relate to something else?
Cheers
Neil
↧
↧
Deploying Package at Log in
I have deployment for an application that is set to install at login. However configuration manager appears to treat a restart of the computer as different then if a user logs off then back on again. How do I make the application deploy install whether
the users restart then log in or log off then log in?
↧
Package Continues To Fail Weekly Content Validation
I have two packages that are distributed to four distribution points in a single distribution point group. Every Sunday when content validation runs, the two packages continue to fail content validation only on one of the four distribution points. The package is configured to copy the content to a package share on the distribution points.
The package has been deleted and recreated, but it still continues to fail content validation. An interesting note is that when the packages are notconfigured to copy the contents to a package share on the distribution points, they pass content validation.
When content validation does fail (when copy the content is set), the SMSDPMON log shows the following bad news.
[Package A]
CreateFileW failed for \\SCCM_SITE_SERVER\smspkgd$\ps10058e\eclipsec++\features\org.eclipse.linuxtools.cdt.libhover.devhelp.feature_1.0.0.201309171939\meta-inf\maven\org.eclipse.linuxtools.cdt.libhover\org.eclipse.linuxtools.cdt.libhover.devhelp.feature\pom.properties SMS_Distribution_Point_Monitoring 7/30/2015 2:54:59 PM 4152 (0x1038)
FileOpen failed; 0x80070003 SMS_Distribution_Point_Monitoring 7/30/2015 2:54:59 PM 4152 (0x1038)
CSMSContentUtils::EvaluatePackageShare: Failed to compute hash for content PS10058E.2 SMS_Distribution_Point_Monitoring 7/30/2015 2:54:59 PM 4152 (0x1038)
[Package B]
CreateFileW failed for \\SCCM_SITE_SERVER\smspkgd$\ps10058c\eclipse\features\org.eclipse.recommenders.feature.completion.rcp.intellig_1.0.4.v20130612-1006-b77\meta-inf\maven\org.eclipse.recommenders\org.eclipse.recommenders.feature.completion.rcp.intellig\pom.properties SMS_Distribution_Point_Monitoring 7/30/2015 3:53:47 PM 5284 (0x14A4)
FileOpen failed; 0x80070003 SMS_Distribution_Point_Monitoring 7/30/2015 3:53:47 PM 5284 (0x14A4)
CSMSContentUtils::EvaluatePackageShare: Failed to compute hash for content PS10058C.2 SMS_Distribution_Point_Monitoring 7/30/2015 3:53:47 PM 5284 (0x14A4)
My assumption is that the content library might be jacked. I am thinking that I might have to rebuild the distribution point. Does anyone have any other suggestions for troubleshooting and rectifying this situation? Is there a way to rebuild the content library without rebuilding the distribution point? The error code 0x80070003mentioned above, suggests the system cannot find the path specified. I have verified both paths exists... Whatever is occurring is beyond me.
-Tony
↧
Reset deployment monitoring info?
Hi,
We recently renamed applications within SCCM. However, the monitoring of deployments shows still (errors) on the old deployment name.
Is there a way to reset monitoring info for an application within SCCM?
Btw I find it very confusing, this monitoring, specifcally on terminal servers (to which 100 users are logged on). I get "an error occured while querying the app-v WMI provider ONLY for a few users: is this historical data -we had issues but they are solved-,
is it recent ...?).
Pls advise.
J.
Jan Hoedt
↧
Program installation priority
Good day,
I have a package containing 6 programs. These programs are vb scripts which calls MSIs and executes very quickly ( in seconds). They will be deployed with 3 deployments, 10 minutes apart via assignment schedule.
The programs breakdown is as follows:
Program 1: Upgrade software A - First deployment (Time stamp 07:00:00)
Program 2: Uninstall software A
Program 3: Upgrade software B - Second deployment (Time stamp 07:10:00)
Program 4: Uninstall software B
Program 5: Upgrade software C - Third deployment (Time stamp 07:20:00)
Program 6: Uninstall software C
Program 1 is dependent on program 2 with the "run another program first option" (uninstall software A then upgrade software A).
Program 3 is dependent on program 4 (uninstall software B then upgrade software B).
Program 5 is dependent on program 6 (uninstall software C then upgrade software C).
I am trying to test what would happen if my test client isoffline when the deployment is scheduled and come online well after the assignment schedule for the third deployment has passed.
When I set the deployment assignment schedules for programs 1, 3 and 5 to run 10 minutes apart the results (in execmgr.log sequence) when the client comes online after the fact are as follows:
Program 1 - software A completes its dependency (program 2 – uninstall A) first (Time stamp 09:00:20).
Program 3 – software B completes its dependency (program 4 – uninstall B) second (Time stamp 09:00:20).
Program 5 - software C completes its dependency (program 6 – Uninstall C) third. (Time stamp 09:00:21).
Program 2 - software A completes fourth (Time stamp 11:00:22).
Program 4 - Software B completes fifth (Time stamp 11:00:22).
Program 6 - Software C completes sixth (Time stamp 11:00:23).
Logic would dictate that the Program 1 must complete its dependency (Program 2) and then Program 1 first, before starting to execute Program 3. This is not the case. After three deployment tests the results are consistent.
Any Ideas as to why this is the case? Your assistance will be much appreciated.
↧
↧
Devices not added to Deployment
This is the firs time this happen to me.
I just setup an Application for Itunes , its being runned from a batch file, test in my Data Center where the Primary Site is to a Virtual Client Machine , everything worked fine.
I add another couple of Devices with Direct Rule , both devices are Member visible in site and receiving other deployments fine.
Why if i go to monitoring - Deployments- and look for that deployment, they never appear even if i run summarization or refresh, they just never are showed like , the only one added its the first one i test.
↧
how change work group to domain controller
dear sir,
we purchase one hp server with 2012 r2 edition, when it connected it was showing as a work-group computer, and the technician also don't now how make it a domain controller, he installing and removing roles and re installing i don't no what is going on, if possible pls help me
thank you
manoj kunnath
↧
Force uninstall in System Context for Applications
Hi
I create Applications script based. in the deployment type I set the installation behavior to install for system.
when I try to uninstall a program from the Software Center I get the following error:
Executing Command line: "blablabla" /SILENT with user context
ScriptHandler::EnforceApp failed (0x8007010b).
AppProvider::EnforceApp - Failed to invoke EnforceApp on Application handler(0x8007010b).
CommenceEnforcement failed with error 0x8007010b.
Method CommenceEnforcement failed with error code 8007010B
++++++ Failed to enforce app. Error 0x8007010b. ++++++
how come the uninstall command runs with user context and not with system context?!
is it even possible to modify it?
thanks for the help
Tamir Levy
↧