Quantcast
Channel: Configuration Manager 2012 - Application Management forum
Viewing all 4762 articles
Browse latest View live
↧

Updated Detection Method is not recognized by clients

October 20, 2016, 8:53 am
$
0
0

Hi all,

I am having troubles with deploying Applications (in this specific case it's Office 2016 ProPlus C2R) when the detection method has been changed afterwards. 

SCCM is updated to version 1606, the client runs Windows 10 Enterprise.

To save some time I copied my existing Office 2013 application, changed the content and deployed it to my test machine. Unfortunately I forgot to change the detection method to something that is unique for Office 2016 and so the existing Office 2013 and the new Office 2016 had the same detection method which caused the Software Center to show the new one as already installed.

So far so dumb, but changing the detection method will fix that issue. At least I thought.

I changed the detection method to Windows Installer and added the new Product Code. Afterwards updating the content on my DP and enforcing the polices on my client. But exactly the same behavior, it's still shown as installed.

As that was two days ago, I had a look at the AppDiscovery.log today and noticed that the client is still trying to detect the old revision.

What am I supposed to do in order to get the discovery process looking for the new revision?

The last time I had such an issue was with the last time we rolled out Office 365. I had a script that for the installation and changed the script afterwards in order to reset the licensing (there were some issues). Even some weeks later there were clients that ran the installation with the old version of the script (they downloaded it the same day as the installation). We never found a solution for this issue.

Maybe I am missing some basic knowledge.

Thank you in advance

Best regards

Fabian


↧
Search

SCCM 2012 Deploying a MSI and MSP file together

November 7, 2012, 11:13 am
$
0
0

Hello all,

    I'm trying to deploy an MSI and an MSP together as an Application in SCCM 2012. They are both in the same direct directory. They both are copied to the workstation.

On the "Programs" tab of the "Deployment Types" I've set the "Installation program" to the following

msiexec.exe /lvx* c:\Logs\ext.log /i "\\CAS\sources\Apps\TestPatch\TestInstall 1.msi" PATCH="\\CAS\sources\Apps\TestPatch\TestPatch 2.msp" \qn

This fails in SCCM with a 0x87D01106 error. If I put it in the batch file, it works perfectly.

I've also tried msiexec.exe /lvx* c:\Logs\ext.log /i "%~dp0eTestInstall 1.msi" PATCH="%~dp0eTestPatch 2.msp" \qn

Which also works in a batch file.

I've also tried msiexec.exe /lvx* c:\Logs\ext.log /i "TestInstall 1.msi" PATCH="TestPatch 2.msp" \qn

Which also works in a batch file.

If I put this in the "Installation program"  msiexec.exe /lvx* c:\Logs\ext.log /i "TestInstall 1.msi" \qn without the Patch information then the application is deployed correctly.

Is there something I'm missing with deploying an application with a MSP?

.


↧
↧

HTTP_QUERY_CONTENT_LENGTH failed 12150

October 20, 2016, 6:23 pm
$
0
0

SCCM2012 SUP working fine until last week when it started reporting 12150 in the console and Patchdownloader has

HttpQueryInfo HTTP_QUERY_CONTENT_LENGTH failed 12150

ERROR:.DownloadContentFiles() failed with hr=0x80072f76

This is an Software update released in October, a couple of updates have downloaded successfully. Error also observed while downloading other updates.

For Kb3192391 which is failing, I tried to run the command psexec /s /i cmd /c start <URL> - (URL of update from Patchdownloader.log)
With above command, IE opens with prompt to open, Save / Save as. So I am assuming IE and Proxy is configured correctly and SCCM2012 / WSUS failing to download updates.
Any help will be much appreciated.

↧

IE-11 Deployment Error

October 22, 2016, 10:16 am
$
0
0

Hi,

I am getting below error in Execmgr.log and IE11_main.log on some Windows 7 SP1 Machines. Is anyone suggest for solution..

Execmgr.log

Raised Program Started Event for Ad:P02200F7, Package:CAS0004C, Program: Install MS Internet Explorer 11execmgr10/22/2016 7:06:31 PM98908 (0x1825C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="CAS0004C",ProgramID="Install MS Internet Explorer 11", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30lexecmgr10/22/2016 7:06:31 PM98908 (0x1825C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="CAS0004C",ProgramID="Install MS Internet Explorer 11", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30lexecmgr10/22/2016 7:06:31 PM98908 (0x1825C)
MTC task with id {E064C964-C19D-4151-AA88-107C354F9459}, changed state from 4 to 5execmgr10/22/2016 7:06:31 PM98908 (0x1825C)
Program exit code 40007execmgr10/22/2016 7:07:10 PM102780 (0x1917C)
Looking for MIF file to get program statusexecmgr10/22/2016 7:07:10 PM102780 (0x1917C)
Script for Package:CAS0004C, Program: Install MS Internet Explorer 11 failed with exit code 40007execmgr10/22/2016 7:07:10 PM102780 (0x1917C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
{
AdvertisementId = "P02200F7";
ClientID = "GUID:9F28DF92-C7C2-439D-B821-40B2F5432A41";
DateTime = "20161022133710.542000+000";
ExitCode = "40007";
MachineName = "INBLR2DT004";
PackageName = "CAS0004C";
ProcessID = 5276;
ProgramName = "Install MS Internet Explorer 11";
SiteCode = "P02";
ThreadID = 102780;
UserContext = "NT AUTHORITY\\SYSTEM";
};
execmgr 10/22/2016 7:07:10 PM102780 (0x1917C)
Raised Program Error Event for Ad:P02200F7, Package:CAS0004C, Program: Install MS Internet Explorer 11execmgr10/22/2016 7:07:10 PM102780 (0x1917C)
Execution is complete for program Install MS Internet Explorer 11. The exit code is 40007, the execution status is FailureNonRetryexecmgr10/22/2016 7:07:10 PM101488 (0x18C70)

IE11-Main.log

00:05.023: INFO:    Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
00:05.163: INFO:    Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.23496 >= 6.1.7601.22444 (True)
00:05.210: INFO:    Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.23142 >= 6.1.7601.22436 (True)
00:34.211: ERROR:   Couldn't create setup troubleshooting shortcut on the desktop. HRESULT: 0x80070002,
00:34.226: INFO:    PauseOrResumeAUThread: Successfully resumed Automatic Updates.
00:34.242: INFO:    Setup exit code: 0x00009C47 (40007) - Required updates failed to download.
00:35.084: INFO:    Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
00:35.194: INFO:    SQM Upload returned 403

Shailendra Dev

↧

Window image not able to deployed (boot image not found error)

October 24, 2016, 7:29 am
$
0
0

Hello guys, what i had done so far is i captured the window 7 image and distribute it content now for the deployment  i created a device collection named it os deployment under the ALL system limiting collection without defining any rule and then import the computer file given the mac address and added this under my os deployment collection .then i created a task sequence and choose install exiting image package and after completing this i finally deploy this package under my OS collection.

now when i run that server of which i copied the mac address i got the pxe boot image error and before this error i was able to successfully connect to pxe boot image . i was stuck at TFTP download : smsboot\x64\pxeboot.com this was repeating continuously so so reslove this error i deleted the  x64 boot image and added it again . but since i added the boot image i m getting this image not found error again and again

↧
↧

How can I exclude device groups from SCEP default malware policy deployment

October 24, 2016, 11:53 am
$
0
0
Hello all.  I am using SCCM to deploy images to my team.  Suddenly, SCEP is installing on each end point.  I suspect that my server team made a policy change at some point that adds any computer with SCCM agent to the SCEP default Malware policy and that in turn deploys SCEP to the device.  Do to company policy, I need to remove endpoint devices from this install.  Where can I make that exclusion?
↧

Applications installing on Devices Excluded from Collection

October 24, 2016, 12:40 pm
$
0
0

Hi All,

As stated above.

I have configured a COLLECTION (Collection1) that has a Queried membership that INCLUDES ALL PCs/Laptop (Collection-ALL), but EXCLUDES a COLLECTION (Collection2) of some PCs (that are part of Collection-ALL).

I have noticed that an Application that deploys to Collection1 (ie. Collection-ALL, excluding Collection2) manages to install on those excluded.

Correct me if I'm wrong but I would assume if any PCs that have been excluded would have taken presedence (similarly to that of a DENY permission).

any suggestions?

↧

SAP 740 Deployment

October 25, 2016, 6:22 am
$
0
0

Hi - I would like to deploy SAP 740 to over 1200 machines using sccm 2012 R2.  Has anyone from here deployed SAP 740?

I have looked at various suggestion offered through google search.  Creating the package and deploying is not working.  So would like to get more help with the process of deploying SAP 740.

Thanks

RL

↧
Search

Change package icon's in new Software Center

October 25, 2016, 4:58 am
$
0
0

Has anyone figured out a way to change the icons of packages? Now with the new Software Center merging the Application catalog, it looks great with all of my application app icons, but since there is functionality that I can only do with packages (scheduling, re-run deployments) I have generic package icons mixed in. There has to be a way to change this somewhere, the catalog shows an icon for the package it's just generic.  

Thanks

Chris

↧
↧

Software Center show application stuck at Installing

July 11, 2012, 5:21 pm
$
0
0

Greetings,

This has happened a few times now over the last couple of weeks. At first I thought it was just a once-off bug, but it keeps coming back and I can't see any patterns to identify the cause or trigger.

Sometimes when I start a Deployment from the Software Center the Status gets stuck at "Installing" and never moves beyond that. It has happened for OSD task sequences as well as Package/programs. In both cases the same Deployment works on other machines, or has worked on this same machine previously. It's not always the same programs, and there seems to be no particular pattern I can find to cause it.

Restarting the SMS Agent doesn't resolve, it just comes up as "Installing" again after the agent has restarted. I've tried clearing the adverts from the client and no difference, restarting the computer also makes no difference... it just comes back as "Installing"

If I remove the computer from the deployment, it dissapears from the Software Center, and when I add the deployment back again it re-appears in Software Center as "Installing" again.

Doing a client repair (ccmrepair) doesn't fix it. Doing a client re-install (with always re-install) doesn't fix it either. I have to completely remove the existing client and reinstall to clear the problem, but that makes the client then appear as a completely new device in CM12 so that's not a very reasonable resolution.

The only log entry I can find that seems to indicate an error is in execmgr.log where an entry saying "OnContentAvailable invalid request GUID handle" appears several times. I have no idea what it means. Running the same deployment on another computer works fine.

Clients are all Windows7 SP1 32bit.

↧

Update Content Applications on a Schedule

September 26, 2013, 8:28 am
$
0
0

I have an app that is global - across many time zones.

Is there a way to schedule updating contet to specific DP's? 

I.E. make sure a DP in california updates at 5pm local time and that a DP in Australia also updates at 5pm local.

I only see the option for "Update Content" on the deployment package, which immediately causes all DP's to update.

↧

Package doesn't re-run after imaging computers

October 26, 2016, 6:39 am
$
0
0

We have SCCM 1511. Having issues with Packages to re-ran automatically after imaging computers.

We have multiple device collections which is querying computers based on computer names. Set to incremental updates and also full update every 7 days

Task sequences has been published to device collections.

After imaging computers stays in relevant device collections.

I have printer scripts, powershell scripts and packages deployed to these device collections and set to Always re-run.

It was never an issues before 1511 after upgrade and windows 10 deployments.

I always assumed when computer re-image it will be removed from device collection and then based on query computer will re-join device collection which make package to re-run

Now its not working with windows 10 imaging, computers shows up in device collections, I can use right click tools to run Machine based policy and other policies but packages no longer re-run.

Nothing has been changed based on client settings, hardware/software inventory cycle, heartbeat discovery.

I know if I setup schedule in package deployments to run at specific time it will re-ran and work.

Since we have more than 200 device collections and frequently image computer being in school district, this is not an easy option

I didn't find a way to setup detection method for scripts for eg. local admin, wireless scripts, printer scripts

Need assistance

RJ

RJ09

↧

How to update DeploymentType Priority field

October 26, 2016, 12:21 am
$
0
0

Hi,

can i update the Priority field of the deployment type through SCCM 2012 WebApi 

I have searched through SMS_deploymentType where the field is named PriorityInLatestApp how the class is or the entity seems to a read only and  SMS_Application - DeploymentTypes does gave priority field, see below  code 


                IResultObject deploymentTypeToModify =
                    _sccmConnectionManager.GetInstance(@"SMS_DeploymentType.CI_ID='" +
                                                      deploymentType.CiId.Trim() + "'");
                deploymentTypeToModify.Get();
     
                    CustomLogger.Log.Info("Updating UpdateDeployment types priority");
                    deploymentTypeToModify["PriorityInLatestApp"].IntegerValue = deploymentType.Priority;

                    deploymentTypeToModify.Put();
                    deploymentTypeToModify.Get();

Michael Sethaba

↧
↧

SQL Express 2014 deployment Issue Windows 10

October 26, 2016, 8:18 am
$
0
0

Hi guys.

Im reopening this topic because i found another issue on my deployment. I will just comment about my New issue.

Im running the Installer thru this batchfile (as myself, admin account) , and it work fine on Windows 10.

SETUP.EXE /q /ACTION=Install /UpdateEnabled=False /FEATURES=SQL,Tools /INSTANCENAME=SQLEXPRESS /BROWSERSVCSTARTUPTYPE=Automatic /SQLSVCACCOUNT="NT AUTHORITY\Network Service" /SECURITYMODE=SQL /SAPWD="123456" /SQLSYSADMINACCOUNTS="Builtin\Administrators" /IACCEPTSQLSERVERLICENSETERMS

But the deployment is not likely working over windows 10 ,  i got an exit code 0 so everything looks to be installed well, but something is not correct in the security logins for the SQL,  is like i was not added at all.  If i open the Sql studio management, i can see very limited part of it, i just see the Built\users and SA account.

When its well/Fine installed, like for example if i deploy it to a windows 7, or if i run the batch file as Myself (admin account) on this windows 10, this is how it should look like.

So its somehow the System Account that SCCM use for installs messing with my Windows 10 deployments? Im attaching the log files i got from the SQL intall in the following link to see if at some point there was an error on the install or warning.

Sql Install Log in One Drive



↧

Content update failure

October 26, 2016, 12:25 pm
$
0
0

Good day,

Hopefully someone can help us out with this issue.

I am currently trying to update a driver package, when I select update content I get a failure. If I remove certain files from the network location and do update content again it works.

This has also happened with our acrobat reader XI application bundle when the 11.0.17.msp file was placed in the folder and attempting to update the content it would fail, but without that file it works fine.

If we copy those files to our production network we have no issues. This tells me it must be a setting in SCCM2012 that runs some sort of check when copying to the DP. Can anyone help point me to what could possibly cause this.

Thank you

Marc Boyle

↧
Search

Deploying new OneDrive for Business sync client- data loss concerns

October 26, 2016, 12:11 pm
$
0
0

We are currently using the OneDrive for Business client that is bundled with Office 2013 and we have had lots of problems with broken OneDrive synchronization.  We want to deploy the “Next Gen” sync client with SCCM to fix our synch issues.

While an in-place upgrade to this new client is possible, I understand that the process deletes all of the local OneDrive data that a user has on their PC and re-downloads everything from the cloud.  This is inherently problematic because the 2013 sync client is usually broken on our end-user PCs.  If we wiped out our user’s local copy of OneDrive data and resynced it from the cloud, our users would lose any of the local changes that they have made that haven’t synchronized with the cloud if their client is broken. 

Has anyone run into this and experienced data loss?  Has anyone found a way to check for the 2013 OneDrive for Business client health before deploying the upgrade?  ie- is there a way to create a collection of healthy OneDrive synch clients??

Thanks!

FP


↧

Batch file isn't running at all

October 26, 2016, 8:10 pm
$
0
0

I'm not sure if this is in the right area, so sorry if it isn't. 

I am deploying a 1.5GB ZIP file to PC's. Once its downloaded, the batch file is supposed to run and ROBOCOPY /MOVE the ZIP to a different folder on the C: drive so we can access it easily and un-zip it. I created a package, selected source file and put in the location on our server, selected the batch file for command line, set it to run whether someone is logged on or not so it defaults to run as administrator. I set it so it automatically downloads and runs locally on the top selection and set it out to our distribution point. 

When I deploy it to my test collection, it downloads the file and batch file, but the batch file never executes. I checked the log in CCM\logs but see nothing mentioning the batch file but showing it downloaded the package. If I run the batch file locally it works fine.

Any ideas?

↧
↧

SCUP 2011: Remote SQL Instead of Local .SDF?

October 28, 2016, 7:39 am
$
0
0

We’d like to use a remote SQL server for the SCUP 2011 DB as opposed to a local copy of its default .SDF DB. Previous versions of SCUP allowed for remote SQL during installation, but 2011 does not.

Is using remote SQL instead of local .SDF supported, and if so could someone kindly point me to those instructions?

Thank you!
↧

Disappearing Deployments

October 28, 2016, 7:21 am
$
0
0

Has anyone one experienced this?

We have a number of deployments to several of our collections.  For some reason, deployments that are older than an x period of time seem not to show up in the software center.  If we go into the deployment of the application and change the schedule to today,  and update the actions on the workstation the application appears in software center.  Is something not configured on SQL ?

↧

App-V published shortcut did not appear for user

October 30, 2016, 5:35 am
$
0
0
An application has been created in SCCM with deployment Type created etc. It is an APP-V package.  When deployed to the target workstation , the published shortcut did not appear.
↧
Viewing all 4762 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>